![icom ic 7100 mods icom ic 7100 mods](http://m0ukd.com/static/mods/IC-7100_SO-239_to_N-Type/Inside_The_IC-7100.jpg)
Adaug în co SKU: IC-7100 Categorii: Statii fixe, Statii mobile, Statii radioamatori Etichete: 144 MHz i 430 MHz cu o unitate de control de la distan, 50 MHz, 70 MHz, D-Star i afiaj tactil. and the Icom logo are registered trademarks of Icom Incorporated. Locate four shift registers and bank of diodes shift registers are 4094’s. If you do not have the Adapter board and have a modified IC-7100 it will show up in the way that you can switch on the radio, The information on the display looks normal but you get no speaker audio and the VFO and buttons do not work. Cantitate Icom IC-7100 Dispozitiv mobil KW / 50MHz / 70MHz / VHF / UHF cu D-Star i afiaj tactil monocrom mare. The IC-7100 fully covers the HF, 50, 70, 144, 430 MHz amatuer bands in. Remove CPU/DSP unit by unscrewing three silver screws holding it down (the silver box on the top of the radio with copper taped sides) and pull up. This will work out well for all applications, from low power, to high power digital 100 duty cycle modes.
![icom ic 7100 mods icom ic 7100 mods](https://www.qsl.net/w/wd4ngb/army/1508%20to%20grd%203.jpg)
#ICOM IC 7100 MODS SERIAL NUMBERS#
The ICOM modification was done from serial numbers US>02003001 and in EU>03003601. The Antenna Tunner Mod This will give the IC7300 Antenna Tuner much wider coverage, so it can handle a higher mismatch. The Adapter 1258M can be used both for early IC-7100 and modified IC-7100 Door de ALC mod pept het gemiddeld vermogen echt vele malen beter en door de.
![icom ic 7100 mods icom ic 7100 mods](https://www.qsl.net/z33t/ic756txmod/ic756_before_mod_eng_small.jpg)
This board is quite simple and can be built by your self also. The IC-7100 provides D-STAR DV mode digital voice and low speed data. The Adapter is available in our webshop or from the distributors. To handle this modification in the Remoterig a adapter PCB called 1258M has to be installed in the (red)strap socket of the Control-RRC. They have solved it by reducing the amplitude of the data sent from control to main unit. The reason of the modification was to avoid that data communication will be heard in FM mode at low modulation levels. ICOM have made a hardware modification lately (March 2014) which makes later produced rigs incompatible with the original Remoterig boxes (New IC-7100 control panels are also incompatible with old IC-7100 main units).